Aluminium Fly
 |
US $25.29
Aerospace composites have contributed to the evolution in the efficiency of airframe and aircraft structures over the last 15 years. There are very few truly revolutionary technologies, like the jet engine, and continuing improvement is the sum of many small steps. On today's generation of commercial aircraft, aerospace composites provide a weight saving of the order of 1% of the Operating Weight Empty. The competitive environment in commercial aviation drives us to seek further ways of reducing Direct Operating Costs (DOC). The largest contribution is first cost followed by fuel.
It would be convenient if we could concentrate our research and technology in the largest sector of the 'pie'. It is unlikely that this approach would result in a large enough improvement in DOC so we have to try to improve in all sectors. The implication for structures is that we have to reduce weight while reducing the overall manufacturing cost of the aircraft.
One option is to increase the use of aerospace composites. Current generation (A320 and A340) typically have around 15% by weight of composite in the structure. If the main wingbox was to be composite, this proportion would increase to 40%. However, to realise the potential weight saving presents a number of formidable technical and economic challenges. The solutions to these challenges are beyond the current state of the art.
At BAe Airbus, the Composite Wing Programme has carried out research into the most effective way of making a wingbox from carbonfibre composite. The importance of reliability and maintainability of the structure in service is recognised.
As the development costs of large technically advanced aircraft continue to escalate, the need to have a product which meets the requirements of the customer and hence will sell successfully in the market becomes ever more critical. The substantial investment which is required to introduce a composite wingbox onto the next generation of large civil airliner demands that the product must achieve customer approval and if possible exceed expectations as soon as it enters into service.
Thin composite laminates, typically on removable structures, is where the majority of the non metallic parts exist at present. The industry introduced advanced composites cautiously to ensure the capabilities of these new materials hence the majority of carbon components used on current civil aircraft is of removable aircraft structures. Moving aerodynamic surfaces, radomes, fairings, and engine cowl doors are all typical examples of composite components and in service experience is showing that there are advantages and disadvantages for both materials. For example, composites eliminate the corrosion problems which metallics suffer (good design and manufacturing practices must be exercised at carbon to aluminium interfaces), but are more prone to erosion on exposed edges while honeycomb structures, of either material, is generally more complex to repair than monolithics.
For structure specific to wings, trailing and leading edges contain many lightweight composite parts which, due to their location, are vulnerable to impact from service vehicles and other hazards while on the ground. (This is equally applicable to metallics but less so for a wingbox which is protected by these 'bumpers'). If damaged, it is generally accepted that such components are more costly to repair than their equivalent metallic parts. Damage assessment, preparation, cleaning and curing of bonded patches are time consuming operations and it is of paramount importance to an operator that this type of work can be completed within the scheduled maintenance downtime. In addition, availability, standardisation and interchangeability of repair materials needs to be improved and this again risks leading to longer downtimes; storage of the materials if required is expensive and often have to be purchased in large quantities.
aviation-database.com has lots of resources for the aircraft industry. The web is a vast source of information. Aviation-database collects the industry into one huge database of contacts. Aerospace Composites Technical Resin Bonders is an article provided to aviation-database by a specialist company in the field of aerospace composites, in recognition of the website's value to the industry as means of targeting advertising.
|
|
Fly Reels with Aluminium Alloy (Black) $34.99 Type: Fly Reels, Fly Reels Fishing Method: Fly Fishing Color: Black Gear Ratio: 1:1 Ball Bearing: 2 2 Line Capacity (mm/m): 0.28/350 Net Weight (g): 160.5 |
|
|
Fly $10 Fly |
|
|
On The Fly $13.79 On The Fly |
|
|
The Fly $6.49 The Fly |
|
|
Fly! Fly! Fly! Fly! Fly! $13.49 Fly! Fly! Fly! Fly! Fly! |
|
|
Aluminium collar $1 Aluminium collar |
|
|
aluminium ball $5 aluminium ball |
|
|
Aluminium Collar $1 Aluminium Collar |
|
|
Aluminium Lake $10.49 Aluminium Lake |
|
|
Fly In $6 Fly In - Lil Wayne |
